Dock access ramp AUSBAU-DG (type "Warehouse-Ground")

The dock access ramp AUSBAU-DG (type "Warehouse-Ground") provides forklifts an access out of a warehouse to the street and increases efficiency of loading/ unloading operations. This is the most affordable way to drive out with a forklift out of a warehouse and get back.
These loading/ unloading platforms are made of robust steel, adapted to the width of the doorway, durable, like regular concrete. Besides, if necessary, they can be unmounted and moved around the warehouse or beyond. The dock access ramp AUSBAU-DG (type "Warehouse-Ground") perfectly fits rented premises and special warehouses along with the product line of mobile ramps AUSBAU.

The company "AV-exim" is an authorized manufacturer of the warehouse ramps under TM AUSBAU.
In production of the warehouse ramp AUSBAU-DG we use steel Е 235-В (Fe 360-B) and Е 235-С (Fe 360-C) in compliance with the ISO standard 630:1995. Welding is carried out with automatic and semi-automatic way in the environment of protective gases.

In production of our ramps we employ:

• profile pipes of different sections (depending on the load);
• hot-rolled sheet 4, 5 and 12 mm thick;
• welded grating (strip section depending on the load);
• metal products with a strength class of at least 8.0.

Distinctive features of the dock access ramp AUSBAU-DG (type "Warehouse-Ground"):

• all steel construction;
• does not require concreting and installation "tightly";
• load capacity from 3 to 10 tons and more;
• length from 6.3 to 12.3 meters and more;
• width of the roadway is from 1.5 to 2 meters and more;
• the load is distributed over several support points;
• a safety board with a height of 200 mm along the entire length of the ramp for safe operation;
• special connecting bridge with a thickness of 12-16 mm;
• a set of mounting plates for fixing the ramp to the ground surface;
• grating, as a roadway, provides excellent grip at any season, sufficient structure rigidity, and the possibility of their quick replacement if necessary.

Additional options for the loading platform AUSBAU-PLT:

1. Wheels guides for a truck (OPT-RRB) 1780х500х308 mm, pair.	2. Built-in leveling platform, instead of a bridge FxD (OPT-DL).	3. Height adjustment on two sides G (OPT-HA2). Height adjustment H by means of support legs mounted on both sides G.
4. Additional bridge (OPT-AB). Additional connecting hinged bridge 300x2000 mm on the free side of G or L.	5. Railing on the 1st side of the L (OPT-HRL). Railing on ramp safe passage for pedestrians thanks to a 1000 mm high railing. They are installed instead of basic fencing (height 250 mm).	6. Rubber rectangular bumpers (OPT-RRB) 400x250x100 mm, pair.
7. Galvanized grille instead of the usual (OPT-ZRS).	8. Ladder to the platform (OPT-LD) - allows the driver to step first onto the platform, and then go down the stairs (different vehicles have different lengths, ie different location of the driver's door from the warehouse wall).	9. Height adjustment on 1st side G (OPT-HA1). Height adjustment H thanks to supporting legs mounted on the one side G (under the bridge FxD).
10. A pair of wheels for а local moving (OPT-WL). It allows moving a ramp between gates using a forklift.	11. Roof over the platform LXG (OPT-RF). The kit is in disassembled form - is installed on site by the client.	12. Railing on 1st side G (OPT-HRL). For better safety of pedestrians working on the platform (the height is 1000 mm).
13. Rubber bump stops on the side L (OPT-DRBL). Type D, dimensions: 90x80 mm.	14. Rubber bump stops on the side G (OPT-DRBG). Type D, dimensions: 90x80 mm.

Dimensions of the standard warehouse ramps AUSBAU-DG:

Under the order we can make ramps of other sizes and dimensions.
Warranty: 18 months
Production time: 3-6 weeks

You can see more photos in the gallery